Wago makes electronics as simple as drawing

At your risk. Wago 2 or 3 or 5 terminal connectors have been used to build easily the Pleiades 2N3053 single transistor class A audio power amplifier. Everything had been connected with Wago connectors, bias resistor, transistor, coupling capacitor, output transformer, fuse, battery, speaker. The transistor is fitted as follows. 3 IC like wirewrap female beens joined together are each wound with blue for collector, green for base and yellow for emitter solid wire cables. The transistor is inserted and the logers colored wires are inserted and fasten on Wago connectors. Wago connectors can be orianted so that the connecting holes look towards the ceiling, so for example a resistor can be fitted from above when its body is parallel to sea level and its legs are bent 90 degrees like the hellenic PI letter. So components are inserted from above like on a breadboard and the connections are done like what is seen on the electronic schematic. So far 3 monoblock power amplifiers had been built. The Pleiades 2 JFET K117 RIAA preamplifier has so far been built on ordinary breadboard from Korea which are very nice too for expeiments.