Revised addition. The following seems to be wrong. Use a belt as thin as the original. Do as written below only in emergency.
At your own risk.
If a belt as thin as the original can't be found and a slightly thicker has to be used...
The diameter may need to be equal to the old slack one or slightly larger.
A thicker belt has more molecules to do the tension job.
It was tried successfully on Sanyo M-G32 Walkman and on Sony TC-D5 PRO.
Experience will tell if it right or one with a smaller diameter should be used.
Is it alway best to use the same thickness and the diameter that will give the desired tension anyway.
Hint by Harris.
At your own risk.
If a belt as thin as the original can't be found and a slightly thicker has to be used...
The diameter may need to be equal to the old slack one or slightly larger.
A thicker belt has more molecules to do the tension job.
It was tried successfully on Sanyo M-G32 Walkman and on Sony TC-D5 PRO.
Experience will tell if it right or one with a smaller diameter should be used.
Is it alway best to use the same thickness and the diameter that will give the desired tension anyway.
Hint by Harris.
No comments:
Post a Comment